Instructions | Dive Bar Cap Candle | LITZ
Product Description
· Name: Dive Bar Cap Candle™
· Item code: H/1558/02
· Item code: H/1558/02
· Made in: Great Britain
Dear Night Fiend
Whether you’re lighting up the night with friends or savouring a solo moment, we hope your purchase meets your expectations and brings you a bit of joy.Product Use
The LITZ Dive Bar Cap Candle is designed to transform an alcohol beverage bottle into a 'dive bar bottle candle'. This transformation is subject to bottle compatibility. Refer to the Bottle Compatibility Information section of the user guide.
The LITZ Dive Bar Cap Candle is designed to transform an alcohol beverage bottle into a 'dive bar bottle candle'. This transformation is subject to bottle compatibility. Refer to the Bottle Compatibility Information section of the user guide.
Before Use
Please read and follow the instructions, as well as the rest of the user guide, before using the LITZ Dive Bar Cap Candle for the first time.
*** Product Age Suitability ***
This product is intended for use by persons 18 years and over.
Items Required
1 spouted jug. 1 lighter. Water. 1 marker pen. Lamp oil. 1 glass bottle.
Bottle Compatibility
Refer to the Bottle Compatibility Information section of the user guide for selecting a bottle, which is not supplied.
Fuel Type
Lamp oil (not supplied) designed for indoor use. Refer to the Lamp Oil Information section of the user guide.
*** Notes, Cautions, and Warnings ***
Throughout the user guide, when necessary, we use Notes, Cautions and Warnings to make you aware of safety considerations.
Bottle Compatibility
Refer to the Bottle Compatibility Information section of the user guide for selecting a bottle, which is not supplied.
Fuel Type
Lamp oil (not supplied) designed for indoor use. Refer to the Lamp Oil Information section of the user guide.
*** Notes, Cautions, and Warnings ***
Throughout the user guide, when necessary, we use Notes, Cautions and Warnings to make you aware of safety considerations.
· Caution: Indicates potential product issues or how to avoid them.
· Warning: Alerts to potential property damage, personal injury, or serious risk.
*** Important User Notes ***
· The seal on the metal cap has been intentionally removed.
· Prepare a dive bar bottle candle on a hard, flat surface.
· A dive bar bottle candle only needs to be filled with water once.
· Each small lamp oil refill lasts approximately 5–8 hours.
· Lamp oil floats on top of water. Water and lamp oil will not mix.
· The long lasting cotton/glass fibre wick never needs trimming.
*** Important Things to Remember ***
· Always leave empty space at the top of all bottles.
· Do not set the wick higher than the recommended height.
· Do not remove the wick from the wick holder.
· Do not allow the wick to touch the water inside the bottle.
GETTING STARTED: 4-Step User Instructions
Bottle Inspection: Hold the bottle up to a light source and inspect it closely from top to bottom for any signs of damage, such as cracks or chips. If you find any damage, however minor, do not use the bottle. Bottle Rinse: Rinse the inside of the bottle with warm or cold water. No need to dry the inside afterward.
Step 2 of 4: Set the Wick Height
Setting the correct wick height is essential for a well-functioning dive bar bottle candle. Wick Height: Position the wick inside the wick holder so it extends 1-2mm above the holder. This wick height will produce the ideal flame height of approximately 1.5cm. To adjust, gently push or pull the wick from underneath the wick holder.
Caution: Do not exceed a 2mm wick height, as this will cause the flame to stretch and produce smoke. Caution: Take care not to pull the wick entirely out of the wick holder when making adjustments.
Refer to the illustration below for guidance.
Step 3 of 3: Placing the Cap Candle on the Bottle
Cap Candle Placement: Push the cap candle onto the bottle. Ensure it meets these criteria: 1. It clicks onto the bottle mouth. 2. It rotates freely around the bottle mouth. 3. It moves slightly up and down on the bottle mouth. 4. It moves slightly from side to side on the bottle mouth. 5. The wick material is straight.
Testing the Cap Candle's Fit. Gently pull on the cap candle to check its security. If it remains on the bottle, it is a secure fit. If it comes off, adjustments are needed to make it a tighter fit on the bottle. Follow the instructions below to adjust the cap candle.
Adjusting the Cap Candle (If Necessary). With the cap candle on the bottle, use the edge of a coin to gently press in four tabs on the metal cap. Repeat if necessary until the cap candle fits securely.
Refer to the illustration below for guidance.
After Adjustment
Ensure the Cap Candle still meets these criteria: 1. It clicks onto the bottle mouth. 2. It rotates freely on the bottle mouth. 3. It moves slightly up and down on the bottle mouth. 4. It moves slightly from side to side on the bottle mouth. 5. The wick material is straight.
Mark the Wick Position
Now that the wick is set to the correct height and the cap candle fits properly on the bottle, follow these steps to mark the wick position inside the bottle: 1. With the cap candle on the bottle, using a marker pen, draw a mark on the outside of the bottle, approximately 2cm below the end of the wick inside. 2. Once marked, remove the cap candle by pushing it upward to release it from the bottle, and set it aside.
Refer to the illustration below for guidance.
Final Step. Step 4 of 4: Fill the Bottle with Water and Lamp Oil
Water Filling: Using a spouted jug or beaker, tilt the bottle slightly and slowly fill it with water. Stop filling once the water level reaches the pen mark on the outside of the bottle. Filling slowly and precisely will help ensure success.
Refer to the illustration below for guidance.
Lamp Oil Filling
Add Lamp Oil: Drip a small amount of lamp oil into the bottle, leaving about a 2cm empty space at the top of the bottle neck. Refer to the illustration above for guidance.
Check Wick Height: Confirm that the wick is set to the correct height within the wick holder, then click the cap candle onto the bottle. Allow 20 seconds for the wick to absorb the lamp oil before lighting.
Observe Flame: Light the candle and observe the flame as it stabilises. Adjust if necessary.
Adjust Wick Height (if necessary): Adjust the wick height to achieve the ideal flame height of around 1.5cm. Warning: Ensure the cap candle has fully cooled before adjusting the wick height.
Additional Notes
Empty Space: Leaving empty space at the top of the bottle neck helps the candle breathe properly and function as intended.
Ideal Flame: The ideal flame burns steady and calm, without stretching or erratic movement.
Pouring Lamp Oil: For precise pouring, use a small plastic spouted medicine cup or similar type vessel. The smaller the vessel, the easier and more accurate the pour.
Excess Lamp Oil: If the bottle is overfilled with oil, use a twisted piece of kitchen roll to absorb the excess. Warning: Dispose of used kitchen roll safely, out of reach of children and pets.
Refill the Bottle Candle with Lamp Oil: Place the extinguished candle on a hard, flat surface. Remove the cap candle and set it aside. Refill: Add lamp oil to the bottle neck, again leaving about 2cm of empty space at the top. Replace Cap Candle: Confirm the wick height is set correctly and return the cap candle to the bottle Warning: Ensure the cap candle has fully cooled before handling.
· End of Instructions ·
EC/C/675 Pub V1.2.E-EN-E-July 2021. LITZ © 2025 Copyright. All Rights Reserved.
Terms | Privacy | Cookies | I.P Protection