Instructions | Belgium Bar Cap Candle | LITZ
Original Instructions
Belgium Bar Cap Candle | LITZ™
View as PDF. Click here
Product Description
· Name: Belgium Bar Cap Candle™
· Item code: H/1559/02
· Made in: Belgium
Dear Customer
Whether you’re lighting up the night with friends or savouring a solo moment, we hope your purchase meets your expectations and brings you joy.
Product Use
The LITZ Belgium Bar Cap Candle is designed to transform an alcohol beverage bottle into a 'Belgium bar bottle candle'. This transformation is subject to bottle compatibility. Refer to the Bottle Compatibility information section of the user guide.
This product is intended for use by persons 18 years and over.
Read and follow the instructions, as well as the rest of the user guide, before using the LITZ Belgium Bar Cap Candle for the first time.
Items Required
1 spouted jug. 1 lighter. Water. 1 marker pen. Lamp oil. 1 glass bottle.
Bottle Compatibility
Refer to the Bottle Compatibility Information section of the user guide
for selecting a bottle, which is not supplied.
Fuel Type
Lamp oil (not supplied) designed for indoor use. Refer to the Lamp Oil Information section of the user guide.
*** Notes, Cautions, and Warnings ***
Throughout the user guide, when necessary, we use Notes, Cautions and Warnings to make you aware of safety considerations.
· Note: Provides important information for optimal product use.
· Caution: Indicates potential product issues or how to avoid them.
· Warning: Alerts to potential property damage, personal injury, or
serious risk.
· The cap candle makes a rattling sound; this is intentional.
· Prepare a Belgium bar bottle candle on a hard, flat surface.
· A Belgium bar bottle candle only needs to be filled with water once.
· Each lamp oil refill lasts approximately 4–5 hours.
· Lamp oil floats on top of water. Water and lamp oil will not mix.
· The long lasting cotton/glass fibre wick never needs trimming.
*** Important Things to Remember ***
· Always leave empty space at the top of all bottles.
· Do not set the wick higher than the recommended height.
· Do not remove the wick material from the wick holder.
· Do not allow the wick to touch the water inside the bottle.
· Do not set the wick higher than the recommended height.
· Do not remove the wick material from the wick holder.
· Do not allow the wick to touch the water inside the bottle.
GETTING STARTED: 4-Step User Instructions
Step 1 of 4: Inspect and Rinse the Bottle
Bottle Inspection: Hold the bottle up to a light source and inspect it closely
from top to bottom for any signs of damage, such as cracks or chips. If you
find any damage, however minor, do not use the bottle. Bottle Rinse: Rinse
the inside of the bottle with warm or cold water. No need to dry the inside
afterward.
Step 2 of 4: Set the Wick Height
Setting the correct wick height is essential for a well-functioning Belgium bar
bottle candle. Wick Height: Position the wick inside the wick holder so it
extends extends 1-2mm above the holder. This wick height will produce the
ideal flame height of approximately 1.5cm. To adjust, gently push or pull the
wick from underneath the wick holder.
Caution: Do not exceed a 2mm wick height, as this will cause the flame to
stretch and produce smoke. Caution: Take care not to pull the wick entirely
out of the wick holder when making adjustments.
Refer to the illustration below for guidance.
Step 3 of 4: Placing the Cap Candle on the Bottle
Cap Candle Placement: Now that the wick height is set, place the cap candle
onto the bottle. Ensure it meets these criteria: 1. It sits perfectly flat against
the bottle mouth 2. It moves slightly from side to side on the bottle mouth. 3.
The wick material is straight.
Mark the Wick Position
Now that the wick is set to the correct height and the cap candle fits properly
on the bottle, follow these steps to mark the wick position on the bottle:
1. With the candle cap on the bottle, use a marker pen to draw a mark on the
the outside of the bottle, approximately 2cm below the end of the wick
inside. 2. Once marked, remove the candle cap and set it aside.
Refer to the illustration below for guidance.
Final Step 4 of 4: Fill the Bottle with Water and Lamp Oil
Water Filling: Using a spouted jug or beaker, tilt the bottle slightly and slowly
fill it with water. Stop filling once the water level reaches the pen mark on the
outside of the bottle. Filling slowly and precisely will help ensure success.
Refer to the illustration below for guidance.
Lamp Oil Filling
Add Lamp Oil: Drip a small amount of lamp oil into the bottle, leaving about a 1cm empty space at the top of the bottle neck.
Check Wick Height: Confirm that the wick is set to the correct height within the wick holder, then place the cap candle onto the bottle. Allow 20 seconds for the wick to absorb the lamp oil and then light the candle.
Observe Flame: Observe the flame as it stabilises. Adjust if necessary.
Adjust Wick Height (if necessary): Adjust the wick height to achieve the ideal flame height of around 1.5cm. Warning: Ensure the cap candle has fully cooled before adjusting the wick height.
How to Refill the Bottle Neck with Lamp Oil
Prepare Candle: Place the extinguished candle on a hard, flat surface. Remove the cap candle and set it aside. Refill: Add lamp oil to the bottle neck, again leaving about 1cm of empty space at the top. Replace Cap Candle: Confirm the wick height is set correctly and return the cap candle to the bottle. Warning: Ensure the cap candle has fully cooled before handling.
Additional Notes
Empty Space: Leaving empty space at the top of the bottle neck helps the candle breathe properly and function as intended.
Pouring Lamp Oil: For precise pouring, use a small plastic spouted medicine cup or similar type vessel. The smaller the vessel, the easier and more accurate the pour.
Excess Lamp Oil: If the bottle is overfilled with oil, use a twisted piece of kitchen roll to absorb the excess. Warning: Dispose of used kitchen roll safely, out of reach children and pets.
· End of Instructions ·
EC/C/675 Pub V1.2.E-EN-E-July 2021. LITZ © 2025 Copyright. All Rights Reserved.
Terms | Privacy | Cookies | I.P Protection
The LITZ™ brand is wholly owned by Faber Metallic GB.